EasyManua.ls Logo

H3C S5120-EI Series - Page 81

H3C S5120-EI Series
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
69
View
Any view
Default level
1: Monitor level
Parameters
interface-number: Specifies an existing aggregate interface number. The value range for the
interface-number argument is the set of all existing aggregate interface numbers.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
down: Displays information about interfaces in the DOWN state and the causes. If you do not specify
this keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display interface bridge-aggregation command to display aggregate interface information.
If interface-number is not specified, this command displays information about all Layer 2 aggregate
interfaces.
If interface-number is specified, this command displays information about the specified Layer 2
aggregate interface.
Examples
# Display information about Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> display interface bridge-aggregation 1
Bridge-Aggregation1 current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0023-8929-4f87
Description: Bridge-Aggregation1 Interface
1Gbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
PVID: 1
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
Last clearing of counters: Never
Last 300 seconds input: 13 packets/sec 865 bytes/sec 0%
Last 300 seconds output: 2 packets/sec 194 bytes/sec 0%
Input (total): 4045 packets, 262366 bytes
21 unicasts, 3968 broadcasts, 56 multicasts
Input (normal): 4045 packets, - bytes
21 unicasts, 3968 broadcasts, 56 multicasts
Input: 0 input errors, 0 runts, 0 giants, 0 throttles

Table of Contents

Other manuals for H3C S5120-EI Series

Related product manuals