EasyManuals Logo

Hach 5500sc SiO2 Installation

Hach 5500sc SiO2
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Prepare Reagent 3
Reagent 3 is supplied as a liquid and a powder that must be mixed together before use. The
approximate shelf life of the prepared reagent is 4 months.
1. Remove the cap from the new liquid bottle #R3.
2. Put the funnel in the new liquid bottle #R3.
3. Add the powder to the liquid.
4. Tighten the cap on the bottle.
5. Invert the bottle again and again until the powder is dissolved.
6. Remove the cap from the bottle. Discard the cap.
7. Tighten the analyzer cap assembly on the bottle.
8. Put the bottle in the analyzer.
Install the analyzer bottles
C A U T I O N
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the personal protective
equipment appropriate to the chemicals that are handled. Refer to the current safety data sheets
(MSDS/SDS) for safety protocols.
N O T I C E
Do not use the SiO
2
citric acid reagent (R2) if the reagent freezes or is turbid. Keep the citric acid reagent (R2)
away from direct sunlight.
18 English

Table of Contents

Other manuals for Hach 5500sc SiO2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hach 5500sc SiO2 and is the answer not in the manual?

Hach 5500sc SiO2 Specifications

General IconGeneral
Power Requirements100 - 240 VAC, 50/60 Hz
Resolution0.001 mg/L
Light SourceLED
DetectorPhotodiode
Sample Flow Rate200 to 500 mL/min
Operating Temperature5 to 45 °C
Sample Temperature5 to 45 °C
Outputs4-20 mA
EnclosureNEMA 4X/IP66
MethodHeteropoly blue method

Related product manuals