10/6/10 888-2629-200 3-11
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Maxiva ULX COFDM Series
Figure 3-6 Drive Chain Faults Screen
NOTE:
Exciter A is always factory installed as the upper exciter unit. The optional
exciter B is installed immediately above the TCU and below the top exciter unit
(see layout photo Figure 1-1 on page 1-2).
3.5.2 Drive Chain Meters
When the "Meters" button in Figure 3-6 is pressed, it will bring up the screen shown in
Figure 3-6. This screen displays input and output information for exciters and pre-
driver/IPA units. Current values for the pre-driver and IPA’s are also given.
To Figure 3-7
To Figure 3-5
To Next Page
Loading...
