10/6/10 888-2629-200 2-1
WARNING: Disconnect primary power prior to servicing.
Maxiva ULX COFDM Series
Section 2
Installation
2
2.1 Introduction
This section includes the information necessary for installation and initial turn on of a
Maxiva ULX Series solid state, UHF TV transmitter. Due to the modular nature of the
Maxiva, all models have similar installation and testing procedures.
2.2 Documentation
The last two letters in the transmitter model number, indicate modulation types. For
simplicity, the model numbers noted in this manual will be noted as ULX-0000**.
NOTE:
The table below denotes the suffix (**) with the modulation type. The 0000 val-
ues in the table indicate power output in kW for the various models.
Table 2-1 Model Number & Modulation Type
Model No Type of Modulation
ULX-0000DV DVB-T/H
ULX-0000IS ISDB-T/H
ULX-0000FL FLO
ULX-0000CT CTTB
ULX-0000CM CMMB