Safety instructions
Quantum
X
I3031-14.0 HBM: public 11
that status or control signals cannot initiate any actions
that may pose a danger to persons or the environment.
Product liability
In the following cases, the protection provided for the
device may be adversely affected. Liability for device
functionality then passes to the operator:
S The device is not used in accordance with the operat
ing manual.
S The device is used outside the field of application de
scribed in this section.
S The operator makes unauthorized changes to the
device.
Warning signs and danger symbols
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
Safety instructions are structured as follows:
WARNING
Type of danger
Consequences of non-compliance
Averting the danger
S Warning sign: draws attention to the danger
S Signal word: indicates the severity of the danger
(see table below)
S Type of danger: identifies the type or source of the
danger
To Next Page
Loading...
