Structure of the manual Introduction
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech
Prüftechnik
Structure of the manual
This manual contains the description, installation and operation of the device. It con-
sists of the following chapters:
Safety measures
Read and follow these safety notes, because they serve the safety of persons and
ensure the reliability and operational safety of the device.
Product description
Here you will become familiar with the device and its modules, functions and control
elements.
Installation and start-up
You must prepare the place of use for the device and provide the necessary supply
connections.
Operation
Once all preparations have been made switch on the device, set the test parameters
and start the test device.
Command reference
Here you find a complete description of the control software with all possible settings.
Maintenance
Apart from the list of maintenance intervals, this chapter also contains the trouble
shooting chart with information on faults, causes and possible remedy.
Signal exchange
This section shows which signals are used in operation with a machine control.
Sample printouts
In this section you find some examples for printouts of measurements, parameters, etc.
Appendix
This chapter contains wiring diagrams and technical data for the device.
The index
The index helps you to find required text passages quickly.
To Next Page
Loading...