Product description Control elements
EN 3925-0060 V207-00 MANUAL R03.doc 23
HeMaTech
Prüftechnik
Control elements
1 Alpha-numerical control field
to enter test parameters (see next page)
2 Key switch
to enable and disable the write protection
3 Key F1
function key (output of filling curve measuring data)
4 Key F2
to enable device functions and to start the test sequence
5 Key I
to switch ON the device
6 Key 0
to switch OFF the device
7 LED´s
to show the current test result
8 free status field
9 free status field
10 free status field
11 Status field LEAK
if the LED next to this status field lights up, the leak simulation is active
12 Status field REJECT
if the LED next to this status field lights up, the current specimen is leaking
13 Status field REWORK
if the LED next to this status field lights up, the current specimen is leaking, but can
be reworked
14 Status field I.O.
if the LED next to this status field lights up, the current specimen is with out leak
To Next Page
Loading...