EN 3925-0060 V207-00 MANUAL R03 7
HeMaTech
Prüftechnik
Introduction
In this chapter you will find some introductory remarks concerning the use of this test-
er, as well as explanations concerning the structure of these operating instructions and
the symbols and text markings used in this manual.
The installation instructions for the device address to persons (skilled electricians and
service engineers) who are entrusted with the installation and maintenance of the de-
vice. These persons must be fully familiar with and strictly follow all regulations con-
cerning electrical engineering.
The installations for operation of the completely installed device are intended for all
persons who will use and make adjustments to the device.
Concerning these operating instructions
The following pages will inform you about the proper use of the device in your produc-
tion or testing environment.
HeMaTech Prüftechnik attaches great importance to the safe, appropriate and eco-
nomical use of the device. However, this requires that you read these operating in-
structions thoroughly before you install and use the device. It contains important
information, which will help you to avoid dangers and enhance the reliability and ser-
vice life of the device. Always keep these operating instructions close at hand near the
device and read the chapter
Safety measures
for your own safety. Strictly follow all
notes, to keep yourself and other members of staff out of danger and to avoid material
damage.
If you have any questions concerning work with the device, for which you have not
found an answer in these operating instructions, please contact:
HeMaTech Prüftechnik GmbH & Co. KG
Siemensstraße 7
D-71409 Schwaikheim
Phone +49 (0)71 95/13 69 0
Fax +49 (0)71 95/13 69 29
www.hematech.de
To Next Page
Loading...