HeMaTech 3925-0050 - System Parameters

Sample printouts System parameters
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech Prüftechnik
125
System parameters
┌──────────────────────────────────────────────────────────────────────┐
│ │
│ HeMaTech Prüftechnik GmbH & Co KG, D-71409 Schwaikheim │
│ │
│ Leak Tester 3925-0050m1-00-00000001 │
│ │
└──────────────────────────────────────────────────────────────────────┘
Type___________________:DHP0050m1-00
Hardware version_______:1
Software version_______:2.03
Software revision______:4
System MCU_____________:1.08
System DCU_____________:2.14
System CCU_____________:1.00
CPLD version___________:1.00
────────────────────────────────────────────────────────────────────────
Job number_____________:P1
Serial number__________:10000000
────────────────────────────────────────────────────────────────────────
Language_______________:English
Display brightness_____:128
Color scheme___________:Blue/White
────────────────────────────────────────────────────────────────────────
Interface 1____________:RS232
Parameter Interface 1__:115200 8 1 No No Line printer 0
Interface 2____________:----------
Parameter Interface 2__:9600 8 1 No XON/XOFF Line printer 0
Format USB-Stick_______:Line printer
────────────────────────────────────────────────────────────────────────
Analog input 0___:12591, 63034, -200.0000, 3000.0000, 0
Analog input 1___:12541, 62851, 0.0000, 1.0005, 0
Analog input 2___: 0, 65535, 0.0000, 1.0000, 0
Analog input 3___: 0, 65535, 0.0000, 1.0000, 0
Analog input 4___: 0, 65535, 0.0000, 1.0000, 0
Analog input 5___: 0, 65535, 0.0000, 1.0000, 0
Analog input 6___: 0, 65535, 0.0000, 1.0000, 0
Analog input 7___: 0, 65535, 0.0000, 1.0000, 0
────────────────────────────────────────────────────────────────────────
Analog output 0__: 3241, 16278, 0.0000, 2.0270, 0
Analog output 1__: 3170, 15972, 0.0000, 1.0000, 0
Analog output 2__: 3170, 15972, 0.0000, 1.0000, 0
Analog output 3__: 3170, 15972, 0.0000, 1.0000, 0
────────────────────────────────────────────────────────────────────────
Program number: Min=1 Max=99 Std=1 Unt=X Edt=1
Date__________: Min=000000000 Max=999999990 Std=000000000 Unt=X Edt=0
Program name__: Min=1 Max=23 Std=23 Unt=X Edt=1
Workpiece_____: Min=1 Max=23 Std=23 Unt=X Edt=1
Operator______: Min=1 Max=23 Std=23 Unt=X Edt=1
Fill pressure_: Min=0.10 Max=1.00 Std=1.00 Unt=bar Edt=1
FillPressOnOff: Min=Off Max=ON Std=ON Unt=X Edt=2
Underfill pres: Min=0.10 Max=1.00 Std=0.80 Unt=bar Edt=1
Underfill time: Min=0.00 Max=10.00 Std=0.30 Unt=sec Edt=1
Test pressure_: Min=0.10 Max=1.00 Std=0.90 Unt=bar Edt=1
TestPressOnOff: Min=ON Max=ON Std=ON Unt=X Edt=2
Pressure tol._: Min=0.5 Max=10.0 Std=1.0 Unt=% Edt=1
Fill time_____: Min=0.10 Max=999.99 Std=3.00 Unt=sec Edt=1
Stabilize time: Min=0.10 Max=999.99 Std=3.00 Unt=sec Edt=1
Pause time____: Min=0.00 Max=999.99 Std=1.00 Unt=sec Edt=1
Auto zero time: Min=0.00 Max=999.99 Std=0.50 Unt=sec Edt=1
Measure time__: Min=0.10 Max=999.99 Std=3.00 Unt=sec Edt=1
Vent time_____: Min=0.10 Max=999.99 Std=1.00 Unt=sec Edt=1
Vent OnOff____: Min=Off Max=ON Std=Off Unt=X Edt=2
Unit__________: Min=Pascal Max=ml/min Std=Pascal Unt=X Edt=2
Fixture offset: Min=-300 Max=300 Std=0 Unt=Pa Edt=1
Volume multi__: Min=0.000001 Max=9.999999 Std=1.000000 Unt=X Edt=1
Rework________: Min=1 Max=2000 Std=100 Unt=X Edt=1
Rework OnOff__: Min=Off Max=ON Std=ON Unt=X Edt=2
Reject________: Min=1 Max=2000 Std=200 Unt=X Edt=1
Reject OnOff__: Min=ON Max=ON Std=ON Unt=X Edt=2
Cons. reject__: Min=0 Max=999 Std=5 Unt=part Edt=1
Protocol to___: Min=Off Max=USB-Stick Std=Ser #1 Unt=X Edt=2