Safety notes Safety measures
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech
Prüftechnik
Safety measures
Safety notes
Thoroughly read and strictly follow these safety notes. They serve your own safety, the
safety of other members of staff and help to avoid damage to the device and accesso-
ry parts.
Danger caused by electric current
Make sure that no fluid can enter into control cabinet, control panel or other parts of
the housing. If this should happen, immediately disconnect the device from the electric
power supply, secure the corresponding socket against reconnection and inform ap-
propriately trained expert personnel or the customer service department of
HeMaTech.
Make sure that the electrical connecting leads are free of damage and well protected
against buckling or squashing. If you detect any damage, immediately disconnect the
device from the electric power supply, secure the corresponding socket against recon-
nection and inform appropriately trained expert personnel or the customer service de-
partment of HeMaTech.
Work in the electrical system – e.g. changing fuses – must only be performed by
trained expert staff. Further maintenance and repair work must only be performed by
the customer service of HeMaTech Prüftechnik or by persons who have been author-
ized by HeMaTech Prüftechnik.
Use this device and any connected devices only on a dedicated electric voltage.
Strictly follow all warnings and instructions given on the device.
If smoke or pungent smells causes suspicion of a defect, you should disconnect the
device from the mains supply and from any other equipment.
Take care that no other objects find their way into the inside of the device. These may
come into contact with live parts or cause a short-circuit, which in turn could cause a
fire or electric shock
Before starting cleaning work disconnect the device from the mains supply and from
all other devices. Use only a slightly damp cloth to clean the device, do not use fluids
and sprays!
Disconnect the device from the mains supply if it is not to be used for a longer period
of time. Store the device only in dry and weather protected rooms.
If safe operation of the device can no longer be assured, you must disconnect the device
from the mains supply and secure it against being switched on again unintentionally.
Risk-free operation is, for example, no longer possible,
− if device or supply lead are visibly damaged,
− if the device does not work properly,
− if the devices was exposed to moisture or rain,
− if condensation water has accumulated,
− if objects have found their way into the device,
− if the device does not work properly, despite orderly performed operating
steps,
To Next Page
Loading...