HeMaTech 3925-0050 - Command Reference; Program Structure

Program structure Command reference
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech Prüftechnik
32
Command reference
In this chapter you will find all commands and functions of the control software for the
leak tester Leak Test 0050. The sequence follows the program structure, as shown in
the table:
Program structure
Level 1
Level 2
Level 3
Level 4
Main menu
1. Automatic
2. Manual
1. Test
2. Pressurize
(Flooding)
3. Setup
1. Parameter set
2. Date & Time
3. Serial Port(s) )
1. Serial #1
2. Serial #2 (opti-
on) or Profibus
3. USB-Stick (opti-
on)
4. Sequencer
4. Delete
5. Print Menu
1. View program sta-
tus
2. Data collection
3. Operating data
4. Counter
5. Backup
6. Error counter status
7. Record)
8 Record Reference
6. Settings
1. Display
2. System parameters
3. Pressure control
4. System status
5. Options
After you have started the device and the initialization process is completed, the dis-
play will show the MAIN MENU of the program or, if applicable, the previously set
start menu.