HeMaTech 3925-0050 - Maintenance; Maintenance Contract; Maintenance Plan

Maintenance contract Maintenance
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech Prüftechnik
108
Maintenance
Maintenance of the device should be performed at regular intervals, depending on the
utilization level (at least once per year). Maintenance of the device should be included
in the company internal inspection intervals.
Maintenance contract
For devices manufactured by us you can, if desired, enter into a maintenance contract
with HEMATECH PRÜFTECHNIK for regular inspections and preventive maintenance.
We will inform you about the exact terms and conditions on request.
Maintenance plan
The following table shows the maintenance work required to maintain the tester in op-
erable condition for normal operation.
Maintenance work
Schedule
Info
Check the service unit
Weekly
Check filter cartridges
and replace if necessary
Perform a self-test
at every change of shift
or specimen
see section
Performing the self-test
Perform a self-test with
leak or master specimen
with leak
at least once a month
see section
Performing self-test with
leak
Clean the shut-off valve
every six months and
annually in case of certi-
fication
Q1
Certification and
calibration
Annually
by
HeMaTech Prüftechnik
GmbH & Co. KG
Buffer battery of
RAM memory
every 10 years
by
HeMaTech Prüftechnik
GmbH & Co. KG