Command reference Menu 5. PRINT MENU
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech
Prüftechnik
Menu 5. PRINT MENU
In the MAIN MENU / 5. Print Menu you find the dialog window OUTPUT DATA. In
this menu you can specify where the data should be transferred to.
Dialog window DATA OUTPUT
In the sub-menus you can determine the output of the different data:
1. View Program Status
In the dialog window PROGRAM STATUS you can view all program numbers, which
are already occupied, in the display. Program locations already used appear inversed.
Dialog window PROGRAM OVERVIEW
To Next Page
Loading...