HeMaTech 3925-0050 - Page 136

EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech Prüftechnik
136
Pressure system 30
Printer setup 50
Product description 13
Profibus 30
Inputs and outputs 58
Program overview 30
Program parameters 107
Protocol 51
Protocol printout 106
R
RefCurveEnd 46
RefCurveStart 45
Reference 30
Reference curve 30
Remote control 60
Remote control, examples 63
Repair 11
Result counter 30, 74
Result memory 30, 73, 108
S
Safety notes 10, 12
Sample printouts 106
Saving the test program 46
Scope of delivery 18
Sequencer 30, 33, 65
Sequencer cycles 65
Sequencer pause time 65
Sequencer setup 65
Serial #1 30
Serial #2 30
Serial 3 30
Serial 4 30
Serial number 6
Setting the pressure control 83
Setting the start screen options 86
Setting the vacuum 69
Setting the vacuum testing pressure
manually 69
Setting up a PC interface 52, 64
Setting up a Profibus interface 57
Setting up an interface for a line printer
50
Setting up an interface for Profibus 57
Setting up interfaces 50
Setting up test programs 41
Setting up the device for specimen 90
Setting up the filling/testing pressure
66
Settings 30, 79
Setup of machine control interface 86
Setup of machine interface 86
SHIFT, control key 22
Showing filling curves 78
Showing system parameters 81
Showing the error counter status 76
Showing the program overview 71
Showing the reference curve 77
Showing the system status 85
Signal exchange 98
Software-Version 6
Specifying series faults 45
Specifying the data type 76
Speed 50
Stabilizing 14
Start-up 23
Static Test
Automatic 34
Manual operation 39
with or without leak simulation 40
Static Test (Flooding) 30
Status field 19
Status fields 21
Stop bit 50
Structure of commands 61, 62
Sub-D socket 20
Supply air connection 20
Switching OFF 26
Switching ON 26
Switching the device ON 26
Symbols 12
System parameters 30, 81, 109
System status 30, 85
T
Technical Data 115
Test medium 13
Connection 20
Test program 30
Test programs
changing 42
Setup 41
Testing process 14
Testing the tester 88
Testing without filling pressure 90
Time-way diagram 101, 103, 105
Transfer rate 50
Transport damage 6
Trend measurement 90
Trouble Shooting Chart 94
Type plate 6, 20
U
Underfilling: 42
V
View of device 19