Command reference Menu 2. MANUAL
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech
Prüftechnik
If the input Abort is set, the entire test sequence will also be aborted. A restart will thus
also start with the first activated test step.
In dependence on the setting of the switch NIO=continue for the corresponding test step,
the sequence is aborted or continued in case of a measuring result unequal I.O..
At the end of any test step the output of the corresponding test result is set for a short
time.
If none of the 10 possible steps is activated in the selected sequencer, the error mes-
sage no step activated with error number 40 will be generated.
To Next Page
Loading...