Command reference Menu 2. MANUAL
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech
Prüftechnik
Testing without or (optionally) with leak simulation
The dialog window MANUAL PRESSURIZE gives you the possibility to pressurize
the test specimen without or, optionally with leak simulation.
Press key F2 to start pressurize without leak simulation.
or
Press the keys SHIFT and F2 simultaneously to pressurize the test specimen with
leak simulation.
Dialog window MANUAL PRESSURIZE
You can follow the pressure build-up sequence by the horizontal progress bar, the
help bar additionally shows the corresponding actual status of static test.
NOTE!
In the operation modes for automatic and semi-automatic testing, the
duration of pressurizing is determined by application of the signal
PRESSURIZE ON.
To Next Page
Loading...