Menu 6. SETTINGS Command reference
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech
Prüftechnik
Language
Here you select the language for the text display.
Mode
Here you specify the appearance of the display:
− black text on white background (standard)
− white text on black background (inverse)
Brightness
Here you can make the display lighter or darker. The corresponding brightness value
is represented by the bar with numbers ranging from 0 … 255.
Changes are directly visible on the display.
Contrast
Here you can change the contrast of the display. The corresponding contrast value is
represented by the bar with numbers ranging from 0 … 255.
Changes are directly visible when changing.
Make sure you have made all necessary settings.
Turn the key switch back to the vertical write protection position.
An audible signal will sound and the device saves the changed data to the RAM
memory.
Press the ESC-key to exit the menu.
To Next Page
Loading...