HIKVISION iDS-9000HQHI-M8/S Series - Page 133

Figure 9-6 Create Array
6.
Enter Array Name.
7.
Select RAID Level as required.
8.
Select the physical disks to
constute the array.
Table 9-1 The Required Number of HDDs
RAID Level The Required Number of HDDs
RAID 0 At least 2 HDDs.
RAID 1 At least 2 HDDs.
RAID 5 At least 3 HDDs.
RAID 6 At least 4 HDDs.
RAID 10 The number of HDD must be an even ranges from 4 to 16.
9.
Click OK.
10.
Oponal: The video recorder will automacally inialize the created array. Go to Storage →
RAID Setup → Array to view the
informaon of the created array.
Digital Video Recorder User Manual
109