79
_____________________________________________________________________
5.3 Setting Items
______________________________________________________________
Flashing cursor
Single
Display and record as one graph.
Dual
Display and record as two graphs.
Quad
Display and record as four graphs.
X-Y (Dot)
Display and record the waveform as an X-Y (Dot)
Screen.
X-Y (Line)
Display and record the waveform as an X-Y (Line)
Screen.
Procedure
Status Screen
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Display Format
and select the
display format using the
buttons.
When the Dual or Quad display is selected, the channel to
be displayed in each display partition can be set.
For details, refer to Section 7.3.2, and for the settings on
the X-Y Screen, refer to Section 5.4.
To Next Page
Loading...
