207
_____________________________________________________________________
______________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
Waveform
Numerical value
Print mode
Print method
Setting the Smooth printing
(MEM only)
Setting the print interval
Manual print
Auto print
Real-time print
Partial print
Screen copy
List print
Report print
NOTE
The amount of paper remaining is printed at the end of a print
job. When new printing paper is installed, the value is reset to
indicate the new remaining quantity.
The printer cannot be used with alkaline batteries: use either the
9418-15 AC ADAPTER (SA145A-1240V-6, SINO
AMERICAN) or 9447 BATTERY PACK when using the
printer.
For details on the print method for the harmonic wave analysis
function, refer to the supplement guide "Harmonic Wave
Analysis Function."
Chapter 11
Printout of Measurement
Data
Waveform data can be printed out in two formats:
waveform or numeric.
Seven different procedures can be used to print out the
measured waveforms. On the printer, the print density can
be changed in three steps.
To Next Page
Loading...
