223
_____________________________________________________________________
11.4 Setting the Status Screen (printout)
______________________________________________________________
1
2
NOTE
Smooth printing is only available for the Memory Recorder
function. The instantaneous waveform recording measured by
the RMS Recorder can be set in Memory Recorder function.
If the print spacing is set longer than the length of a record,
only the first point is printed.
When the Print Mode is set to "Logging" in Recorder function
or RMS recorder function (excluding 100 ms/DIV), the
maximum and minimum values are printed.(Refer to Appendix
2.)
For the example of printing, refer to Section 11.7.
11.4 Setting the Status Screen (printout)
1. Display layout settings (Display Format) (refer to section
for each function)
The screen display layout can be set for showing input
signals on the screen display and recording them on the
printer.
The Single, Dual, Quad, and X-Y(dot/line) displays are
available.
2. Printer recording format settings (Print Mode)
Select the format, waveform, or numerical value should be
used to output measured data.
To Next Page
Loading...
