174
_____________________________________________________________________
9.1 Using the A/B Cursors
______________________________________________________________
12 3
OFF
Disable A/B cursors
Line cursor (vertical) (t and 1/t are displayed)
Line cursor (horizontal) (v is displayed)
+
Trace cursor (the point where the cursor crosses the
waveform)
A
Use the cursor A only
A-B
Move the cursor A only
A-B
Move the cursor B only
A-B
Move simultaneously both cursors A and B
9.1.1 Using the Line Cursors (Vertical)
The line cursor (vertical) displays the time and period
starting from the trigger position. On the recorder, the line
cursor (vertical) displays the time and period starting from
the initiation of recording.
Procedure
Waveform Screen
1. Press the
DISP
button to display the Waveform Screen.
2. When position 1 shown in the figure below is selected to
SCRL
(scroll), use the buttons to set to
CSR
(cursor).
Pressing the
and buttons simultaneously also changes
setting.
3. Move the flashing cursor to position 2 and select
(vertical line cursor).
4. Move the flashing cursor to position 3 and select the cursor
to be moved.
5. Move the A/B cursors using the scrolling button to
view the display. Pressing the
buttons moves the
cursors faster.
To Next Page
Loading...
