Hioki 8808-51 - Window-In Trigger

150
_____________________________________________________________________
8.8 Internal Trigger
______________________________________________________________





Upper limit
Lower limit
Flashing cursor
Flashing cursor
8.8.2 Window-In Trigger
Set upper limit level and lower limit level and activated
when the input signal enters the range between these limits.
Procedure
Trigger Screen
1. Press the
SET
button to display the Trigger Screen.
2. Move the flashing cursor to the position shown in the
figure below and select
IN
using the buttons.
3. Move the flashing cursor to the position shown in the
figure below, and set the lower limit of the trigger level
using the
buttons.