205
_____________________________________________________________________
10.5 Initialize Screen
______________________________________________________________
Flashing cursor
10.5.4 Self-check
If you run a self-check and the message "NG" appears or
there seems to be a problem, please have the product
serviced.
Procedure
Initialize Screen
1. Press the
SYSTEM
button to display the Initialize Screen.
2. Move the flashing cursor to the Self-check item to be
checked and execute using the
buttons.
KEY/LED Check
The Key check is completed by pressing every buttons. If a
malfunction is found, press the
START
and
STOP
buttons at
the same time to abort checking.
To check LED operation, confirm that the LED lights green
when the
START
button is pressed.
LCD Check
The LCD check tests character display, and solid displays.
Press any button to change screen.
To Next Page
Loading...
