266
_____________________________________________________________________
13.1 Connecting the RS-232C Cable
______________________________________________________________
CAUTION
The RS-232C interface is not isolated from the product.
Be aware that the logic input and RS-232C share common
ground.
The 9612 RS-232C CABLE and connectors of the product
should be mated carefully. Forcing the connectors together
can damage the connector contacts.
9612 RS-232C CABLE (crossed)
Pin
No.
Circuit designation CCITT
Simbol
EIA JIS Common
2
3
5
7
8
Receive data
Transmitted data
Signal ground or common
return
Request to send
Clear to send
104
103
102
105
106
BB
BA
AB
CA
CB
RD
SD
SG
RS
CS
RxD
TxD
GND
RTS
CTS
13.1 Connecting the RS-232C Cable
Connect the 9612 RS-232C CABLE (cross cable) and the
product as shown in the figure below.
To Next Page
Loading...
