Hioki 8808-51 - Setting Items; Setting the Function Mode

74
_____________________________________________________________________
5.3 Setting Items
______________________________________________________________
Flashing cursor
Recorder Function Description
Input signals converted to digital data are displayed and printed in real
time (when the 8992 PRINTER UNIT is connected).
When measurement is finished, the last 400-division quantity is stored in
internal memory, so reverse scroll viewing and reprinting are possible.
Stored in internal memory
(400 DIV)
Display
Recording paper
5.3 Setting Items
5.3.1 Setting the Function Mode
The 8807-01, 8808-01 has three function modes.
Additionally, the 8807-51, 8808-51 also offers a harmonic
wave analysis function. Select the Recorder function.
Procedure
Status, Channel, Trigger Screen
1. Press the
SET
button to display the Status, Channel, or
Trigger Screen.
2. Move the flashing cursor to the position shown in the
figure below and select
RECORD
using the buttons.