261
_____________________________________________________________________
12.4 Settings on the File Configuration Screen (Application Functions)
______________________________________________________________
Flashing cursor
12.4.2 Self-check
Checks the PC Card.
The contents are the same as the PC Card Check in the Self
Check on the Initialize Screen. Refer to Section 10.5.4.
Procedure
File Config Screen
1. Press the
CARD
button to display the File Config Screen.
2. Move the flashing cursor to the position shown in the
figure below and use the
buttons to execute.
PC card Check
The PC Card check tests the items below. The checking
contents are the same as the PC Card self test on the
Initialize Screen.
PC Card Type ATA card/ SRAM card/ Modem card
RAM Size Capacity of the using card
Battery Level OK (normal)
LOW (The battery should be changed soon)
NG (The battery change is needed
immediately)
Write protect PROTECT/NONE
To Next Page
Loading...
