88
_____________________________________________________________________
5.5 Waveform Screen Settings (REC)
______________________________________________________________
1
2
34 5 6 7
1 Function MEMORY/RECORD/RMS
2 Time axis range 100 ms to 1 h/DIV
3 Compression of the
time axis
x1 to x1/500
4 Trigger mode SING/REP
5 Waveform display area Full screen/partitioned display screen
6 PC card indicator Appears when a PC card is installed
(SRAM/ ATA/ FAX)
7 Power indicator Appears the type of power supply of the
product or battery low mark.
NOTE
Input-related settings are accessible by pressing a channel select
button (CH1 to CH4) from the Waveform Screen. For details,
refer to Section 7.4. Trigger timing setting is not accessible from
the Waveform Screen. Trigger timing must be set from the
Trigger Screen.
5.5 Waveform Screen Settings (REC)
Settings for the Waveform Screen are described below. For
details, refer to Section 5.3.
Procedure
Waveform Screen
1. Press the
DISP
button to display the Waveform Screen.
2. Move the flashing cursor to the item to be set.
3. Use the
buttons to make a setting.
To Next Page
Loading...
