Hioki 8808-51 - Start and Stop Operation (REC)

89
_____________________________________________________________________
5.6 Start and Stop Operation (REC)
______________________________________________________________
Trigger conditions
are met
Measurement
start
Recording data
Measurement
end
SINGLE
Trigger
mode
REPEAT
STOP
5.6 Start and Stop Operation (REC)
Press the
START
button to start measurement, and
LED lights in green. The
START
button activation
condition can be selected. Refer to Section 10.1.1.
"Wait for trig" is displayed until the trigger condition
occurs.
Data recording starts when the trigger conditions are
met. (Trigger timing: Start, Start&Stop)
During recording, "Storing" is displayed.
If the printer is on, printing initiates simultaneously
with display.
When automatic storage is enabled and measurement
is interrupted in progress, measurement data taken
prior to the interruption point is stored automatically.
Auto saving is executed.
Trigger mode: REP
Trigger timing: Start, Start&Stop
Activates the trigger waiting condition. Input resumes
when the trigger conditions are met.
Trigger timing: Stop
Measurement starts.
Trigger mode: SING
Measurement stops.
Trigger mode: REP
Measurement can be aborted by pressing the
STOP
button.