Hioki 8808-51 - Setting the Time Axis Range

37
_____________________________________________________________________
4.3 Setting Items
______________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
The data interval for the
time axis range setting is
1/80 (1 DIV=80 data
points).
Flashing cursor
Flashing cursor
4.3.2 Setting the Time Axis Range
Set the speed for inputting and storing the waveform of the
input signal. Time axis range setting expresses the time for
1 division.
Procedure 1
Status Screen
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Time/DIV
and select the time
axis range using the
buttons.
Pressing the
TIME/DIV
button moves the flashing cursor
automatically to the Time Axis position for setting.
Procedure 2
Waveform Screen
1. Press the
DISP
button to display the Waveform Screen.
2. Move the flashing cursor to the position shown in the
figure below and use the
buttons to make a setting.
Pressing the
TIME/DIV
button sets the time axis regardless of
the flashing cursor position.