106
_____________________________________________________________________
6.3 Setting Items
______________________________________________________________
Flashing cursor
OFF
Disables Instantaneous Waveform Recording
(Memory Recording)
ON
Enables Instantaneous Waveform Recording
(Memory Recording)
NOTE
If the power supply is interrupted during measurement and
Instantaneous Waveform Recording is enabled, then the effective
value waveform data will not be saved but instantaneous
waveform data will be saved.
6.3.9 Instantaneous Waveform Recording
When Instantaneous Waveform Recording is enabled, an
abnormal phenomena that occurs during measurement is
captured by the trigger and recorded in parallel by the
Memory Recorder using high-speed sampling.
Procedure
Status Screen
(1) Set Instantaneous Waveform Recording on or off.
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to the
Memory Record
(Instantaneous Waveform Recording) item and set to on or
off using the
buttons to make a setting.
To Next Page
Loading...
