107
_____________________________________________________________________
6.3 Setting Items
______________________________________________________________
Flashing cursor
Flashing cursor
(2) Set the time axis of the Instantaneous Waveform
Recording.
When Instantaneous Waveform Recording is turned on,
settings for the memory waveform are displayed.
Set the time axis for the memory waveform.
Move the flashing cursor to
Time/DIV
and use the
buttons to make a setting.
(3) Set the recording length the Instantaneous
Waveform Recording.
Move the flashing cursor to
Shot
and use the buttons
to make a setting. For details, refer to Section 6.3.3.
To Next Page
Loading...
