Hioki 8808-51 - 12.2 Using the PC Card Slot

214
_____________________________________________________________________
11.2 Environment Screen (Printer)
______________________________________________________________
Flashing cursor
Light
Print lighter density. Reduces power
consumption.
Standard
Print standard density.
Dark
Print darker density.
NOTE
The print density of each channel corresponds to the waveform
display color. For details, refer to Section 7.3.1.
11.2.5 Printer Density
Serves to set the printer density. Select the setting which
yields the most easy to read printout.
Print density can be selected from three types.
Procedure
Environment Screen
1. Press the
SYSTEM
button to display the Environment
Screen.
2. Move the flashing cursor to
Print Density
and use the
buttons to make a setting.