Hioki 8808-51 - Setting Items; Setting the Function Mode

36
_____________________________________________________________________
4.3 Setting Items
______________________________________________________________
Flashing cursor
Memory Recorder Function
Analog input signals are converted by the A/D converter to digital values
for display and storage in the internal memory.
X-Y combined plotting of multiple channels is possible.
Digital
signal
A/D Converter
RAM
Digital processing
Display
A
nalog
input signal
Input voltage
Sam
p
lin
gp
eriod
Time
Screen dis
p
la
y
4.3 Setting Items
4.3.1 Setting the Function Mode
The 8807-01, 8808-01 has three function modes.
Additionally, the 8807-51, 8808-51 also offers a harmonic
wave analysis function. Select the Memory recorder
function.
Procedure
Status/ Channel/ Trigger Screen
1. Press the
SET
button to display the Status, Channel, or
Trigger Screen.
2. Move the flashing cursor to the position shown in the
figure below and select
MEMORY
using the buttons.