256
_____________________________________________________________________
12.3 Settings on the File Screen
______________________________________________________________
Flashing cursor
Load
Load the data from a PC card.
Save
Save the data on a PC card.
Delete
Delete files or directories.
Make Dir
Create directories.
Format
Initialize a PC card.
Rename
Rename a file or directory name.
12.3.5 Initializing
Initialization method is described below.
Procedure
File Screen
(1) Select the command to initialize a PC card.
1. Press the
CARD
button to display the File Screen.
2. Move the flashing cursor to the position on the figure
below and select
Format
using the buttons.
(2) Execute Initialization.
Press the
START
button to display a confirmation screen,
and press it again to proceed with initialization, or press the
STOP
button to abort initialization.
To Next Page
Loading...
