Hioki 8808-51 - Numerical Calculation (Measurement)

64
_____________________________________________________________________
4.9 Numerical Calculation (Measurement)
______________________________________________________________
CH1
CH1
Average
Value
Average
Value
Average
Value
ON/OFF Setting
Channel Selection
for Calculation
Calculation Selection
Calculation
Execution
Dis
p
la
y
the Numerical calculation Screen.
Numerical calculation is not performed.
Numerical calculation is performed.
Up to four simultaneous calculations
(numbered 1 to 4) can be set.
Channels which are disabled for
displaying and recording are also
disabled for calculations.
Calculation results are not printed.
Calculation results are printed.
Calculation results are not saved to PC
card.
Calculation results are saved to PC card.
Display the Waveform Screen, and press
the START button to start calculations.
Waveform input data is subject to
calculation.
Calculation is applied to the waveform
data in internal memory. Move the
flashing cursor to Execute, and execute
b
yp
ressin
g
the buttons.
Settings Screen
Display
OFF
ON
CH1
New Data
Existing
Data
Average
Value
Print Calculation
Results
Save Calculation
Results
OFF
ON
OFF
ON
4.9 Numerical Calculation (Measurement)
Numerical calculations apply to recording by the Memory
Recorder and Instantaneous waveform recording in RMS
Recorder. Results of calculations are displayed numerically
(by printing or saving). Waveforms stored by the
Instantaneous waveform recording in RMS Recorder are
calculated using the Memory Recorder function. When the
A/B cursors are used, calculations are performed on the
data between the cursors.
The following eleven types of calculations can be
performed.
(1) Average value (2) Peak-to-peak value (3) Maximum value
(4) Time to maximum value (5) Minimum value
(6) Time to minimum value (7) Rms value
(8) Period (9) Frequency (10) Area value
(11) XY area value