28
_____________________________________________________________________
3.5 Input Operation
______________________________________________________________
CH1-CH4 buttons Display the Settings window for
voltage axis range, magnification, zero
position, filtering, trigger conditions
and more.
RANGE button Serves to set the voltage axis range for
the channel selected.
POSN button Serves to set the zero position for the
channel selected.
TIME/DIV button Serves to set the input signal capture
speed.
CH1
CH2
CH3
CH4
RANGE
POSN
TIME/DIV
3.5 Input Operation
Press a channel select button (CH1 to CH4) on the
Waveform Screen to display the desired Settings window.
Other settings are made by moving the flashing cursor with
the Cursor buttons (
) and pressing the Select
(
/ ) buttons.
To Next Page
Loading...
