Hioki 8808-51 - Chapter 12 Storing the Measurement Data

211
_____________________________________________________________________
11.2 Environment Screen (Printer)
______________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
Flashing cursor
Time
Displays the time from the trigger point (unit:
seconds)
Time (60)
Displays the time from the trigger point (unit: hour,
minutes, seconds).
Div
Displays the number of DIV from trigger point.
Date
Displays the date and time when a waveform is
captured.
100s
Time
1m40s
Time
(60)
Div
Date
10 20
99-3-3 12:30:45
11.2.2 Time Value
The time from the trigger point and other information can
be printed.
Procedure
Environment Screen
1. Press the
SYSTEM
button to display the Environment
Screen.
2. Move the flashing cursor to
Time Value
and use the
buttons to make a setting.