Hioki 8808-51 - Setting the Channel Screen; Setting the Waveform Display Color

118
_____________________________________________________________________
7.3 Setting the Channel Screen
______________________________________________________________
Flashing cursor
Waveform is not displayed.

Waveform is displayed in Red, Green, Yellow,
Aqua, Blue, Gray
Li
s
t
OFF
(
Waveform is not dis
p
la
y
ed
)
Red/Green
(
Prints the waveform with normal
p
rint densit
y
.
)
Yellow/A
q
ua
(
Prints the waveform with li
g
hter
p
rint densit
y
.
)
Blue/Gra
y(
Prints the waveform with darker
p
rint densit
y
.
)
7.3 Setting the Channel Screen
7.3.1 Setting the Waveform Display Color
Set the display color for the waveform.
Procedure
Channel Screen
1. Press the
SET
button to display the Channel Screen.
2. Move the flashing cursor to the desired channel position.
3. Use the
buttons to make a setting.
If the data is to be output on the 8992
PRINTER UNIT
, any
of three print densities may be set for six waveform display
colors. Printing density settings have no effect on real-time
printing.