Hioki 8808-51 - Setting the Auto Save Function

80
_____________________________________________________________________
5.3 Setting Items
______________________________________________________________
Flashing cursor
OFF
Auto save is disabled.
Binary
Data are stored as binary data.
Text
Data are stored as text data.
Data stored in the text format is not readable by
the product.
5.3.5 Setting the Auto Save Function
When the function is enabled, measurement data are
automatically stored on PC card after they are captured.
This function stores a file in the directory currently selected
on the File Screen.
Procedure
Status Screen
(1) Select the data format for Auto Save.
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Auto Save
and select the type of
saving using the
buttons.
For Continuous X-Y plot, this item setting is Binary only.