Hioki 8808-51 - Printing Procedure; Manual Print

225
_____________________________________________________________________
11.6 Printing Procedure
______________________________________________________________
NOTE
When cursors A and B are enabled, partial printing is executed.
11.6 Printing Procedure
11.6.1 Manual Print
This mode serves to print waveform data from the internal
memory.
Memory recorder
Measurement data from one measurement (entire recording
length) are printed.
Instantaneous waveform in RMS recorder
The function is switched to Memory Recorder on the
Waveform Screen.
Measurement data from one measurement (entire recording
length) are printed.
Recorder, RMS recorder
Measurement data stored in memory before the end of
measurement are printed
DMM Screen
The numerical voltage values on the DMM Screen are
printed.
Procedure
Waveform Screen
After the measurement is completed, press the
PRINT
button.
Since data are stored, they can be printed as often as
desired.
When magnification/compression was used, the printout
reflects this condition.
If you want to stop the printing, press the
STOP
button.