55
_____________________________________________________________________
4.8 Extended Status Screen Setup (MEM)
______________________________________________________________
Recordin
len
th Recordin
len
th Recordin
len
th
Brief
henomena ma
not re
ister
Recordin
len
th Recordin
len
th Recordin
len
th
Recordin
len
th
Data are divided into blocks and recorded in memory.
Dead time: (interval in which no sampling occurs due to display
and
rint
rocessin
4.8.3 Sequential Save Function
This function divides the memory into separate blocks, each
of which can be used for waveform recording.
Input signal capture is carried out continuously using the
trigger, storing waveform data successively in each block.
During recording, no display or printout is carried out.
This reduces dead time (non-sensitivity periods due to
display and printing delays).
When continuous print (auto print) is being performed in
REPEAT trigger mode
Using sequential save
To Next Page
Loading...
