Hioki 8808-51 - 5.6 Start and Stop Operation (REC)

65
_____________________________________________________________________
4.9 Numerical Calculation (Measurement)
______________________________________________________________
Flashing cursor
Flashing cursor
OFF
Disables the numerical calculation.
ON
Enables the numerical calculation.
Procedure
Measurement Screen
(1) Display the Measurement Screen.
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Measurement
and display the
Numerical calculation Screen using the
buttons.
(2) Set the numerical calculation to on or off.
Move the flashing cursor to
Measurement
and set to on or
off using the
buttons.