87
_____________________________________________________________________
5.4 Using the X-Y CONT Recorder
______________________________________________________________
Flashing cursor
4
5
Procedure
Status, Channel Screen
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Display Format
and select format
X-Y (Dot)
or
X-Y (Line)
using the buttons.
3. Press the
SET
button with the Status Screen displayed to
display the Channel Screen.
4. Select the display color using the
buttons.
5. Move the flashing cursor to the channel to use as the X
axis, and select it using the
buttons.
Channels other than the one selected for the X axis are the
Y-axis channels.
6. Press the
START
button to start measurement.
To Next Page
Loading...
