Hioki 8808-51 - Page 12

ii
_____________________________________________________________________
Inspection
______________________________________________________________
Options
9418-15 AC ADAPTER
(SA145A-1240V-6, SINO AMERICAN)
(universal 100 to 240 V AC, 12 V DC output)
9197 CONNECTION CORD
(maximum input voltage: 500 V AC/DC)
9198 CONNECTION CORD
(maximum input voltage: 300 V AC/DC)
9199 CONVERSION ADAPTOR (BNC-Banana female)
9217 CONNECTION CORD (BNC-BNC)
(maximum input voltage: 300 V AC/DC)
9322 DIFFERENTIAL PROBE
(maximum input voltage: CAT ll: 1000 V AC, 2000 V
DC, CAT lll:600VAC/DC)
9234 RECORDING PAPER (18 m/59.06feet, 112 mm/4.41"
width)
9447 BATTERY PACK (7.2 V/2450 mAh)
9643 CHARGE STAND (for Model 9447 BATTERY PACK)
8992 PRINTER UNIT (printing width 100 mm/3.94")
9320-01 LOGIC PROBE
(4-channel digital, contact signal on/off detection)
9321-01 LOGIC PROBE
(4 insulated channels, AC/DC voltage on/off detection)
*9323 CONVERSION CABLE (for connecting 9320, 9321)
9331 WAVE PROCESSOR (Operation software for
personal computer)
9335 WAVE PROCESSOR (Operation software for
personal computer)
9391 CARRYING CASE
9612 RS-232C CABLE (mini DIN 9-pin Dsub 9-pin)
*9270CLAMPONSENSOR(20A,5Hzto50kHz)
*9271 CLAMP ON SENSOR (200 A, 5 Hz to 50 kHz)
*9272 CLAMP ON SENSOR (20 A/200 A, 5 Hz to 10 kHz)
9277 UNIVERSAL CLAMP ON CT (20 A, DC to 100 kHz)
9278 UNIVERSAL CLAMP ON CT (200 A, DC to 100 kHz)
*9279UNIVERSALCLAMPONCT(500A,DCto20kHz)
*9555 SENSOR UNIT (used together with 9270 to 9272,
9277 to 9279)
9018-10 CLAMP ON PROBE (10 A to 500 A, 40 Hz to 3 kHz)
9132-10 CLAMP ON PROBE (20 A to 1000 A, 40 Hz to 1 kHz)
*9303 PT
*220H PAPER WINDER