Hioki 8808-51 - Page 163

139
_____________________________________________________________________
8.2 Operation Sequence (Trigger mode setting)
______________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
Setting the extended trigger
Timer trigger Use for recording a specific interval.
Refer to Section 8.9
Use the EXT TRIG terminal
Refer to Section 8.10
External trigger
Setting the extended trigger
Setting the internal trigger
Setting the manual trigger
Setting the internal trigger
Analog trigger
For details, refer to sections listed
below.
Logic trigger
Section 8.8.1
Level trigger
Window-in trigger
Window-out trigger
Setting the manual trigger
Pressing the
button
assigns trigger
priority to another trigger source.
Refer to section 8.7.
Voltage drop trigger
Waveform detection
trigger
Section 8.8.2
Section 8.8.3
Section 8.8.4
Section 8.8.5
The signal of a logic channel can be
used as trigger source
Section 8.8.6
Setting trigger source
AND/OR Linking
Setting trigger source
AND/OR Linking
OR
Triggering occurs when condition for
one trigger is met.
The analog trigger, logic trigger,
external trigger, and timer trigger can
be linked with the AND/OR logical
operators. Refer to section 8.6.
Triggering occurs when conditions for
all triggers are met.
AND