Hioki 8808-51 - Page 222

198
_____________________________________________________________________
10.3 RS&COPY Screen (SYSTEM)
______________________________________________________________
Flashing cursor
Printer
Prints on the 8992 PRINTER UNIT.
PC Card
Screen data is saved as a BMP file on the PC Card.
RS-232C
Screen data is sent in BMP format to the device
connected to the RS-232C interface.
Flashing cursor
Color
Output in color
Grayscale
Output in gray scale
MONO
Output in black and white (black background)
MONO (REV)
Output in black and white (white background)
(2) Select the output destination.
Move the flashing cursor to
Output Device
and use the
buttons to make a setting.
(3) Select output coloring.
Move the flashing cursor to
Color Type
and use the
buttons to make a setting.