Hioki 8808-51 - 14.6 Harmonic Wave Analysis Function

254
_____________________________________________________________________
12.3 Settings on the File Screen
______________________________________________________________
NOTE
Do not use the characters and symbols below in a file name. A
file containing any of these characters/symbols in its file name
cannot be processed under Windows 2000 or XP.
(2) Enter the directory name.
1. Press the
START
button to display the Directory Name Entry
Screen.
2. Press the
buttons to display the Comment Entry
Screen.
3. Move the cursor to the characters to be entered to enter the
directory name (refer to Section 11.3.3 Text Entry
Procedure).
4. Press the
START
button to create the directory.
Changing a directory
1. Press the
CARD
button to display the File Screen.
2. Select the desired directory to move using the
cursor
buttons.
3. Change the directory using the
cursor buttons.
To move to the upper directory, use
.
To move to the lower directory, use the
.