5
_____________________________________________________________________
1.2 Identification of Controls and Indicators
______________________________________________________________
1234
Upper Side View
1. PC card slot
Insert the PC card.
2. Eject button
Press this button to eject a PC card.
3. RS-232C connecting
terminal
Connect the 9612 RS-232C CABLE.
4. Logic probe
connectors
Input connector for the logic input
section, designed for the optional 9320-01
and 9321-01 LOGIC PROBEs.
Lower Side View
12 3456
1. AC adapter connecting terminal
(for the AC adapter specified by Hioki)
2. Power switch
(POWER)
Switches on or off the power supply.
3. External trigger
terminal
(EXT TRIG)
External trigger source input.
4. Trigger output
terminal
(TRIG OUT)
Trigger signals are output.
5. Ground terminal
(GND)
Used together with the trigger terminal.
6. Contrast adjustment
knob
Adjusts screen contrast.
To Next Page
Loading...
