Hioki 8808-51 - Page 6

6.5.1 Selecting the Recorder Function or RMS
Function 112
6.6 Start and Stop Operation (RMS) 113
Chapter 7 Input Channel Settings 115
7.1 Overview 115
7.2 Operation Sequence (Input Channel
Setting)
116
7.3 Setting the Channel Screen
118
7.3.1 Setting the Waveform Display Color 118
7.3.2 Setting the Waveform Display Graph
119
7.3.3 Setting the Voltage Axis Range
120
7.3.4 Setting the Input Coupling
121
7.3.5 Setting the Magnification/Compression
Ratio Along the Voltage Axis
123
7.3.6 Setting the Zero Position
124
7.3.7 Setting the Low-Pass Filter
126
7.3.8 Setting the Logic Inputs
127
7.4 Waveform Screen Input Settings 129
7.5 Scaling Function 130
Chapter 8 Trigger Functions 137
8.1 Overview of the Trigger Function 137
8.2 Operation Sequence (Trigger mode setting)
138
8.3 Trigger Mode 140
8.4 Pre-trigger
141
8.5 Trigger Timing (REC only) 143
8.6 Trigger Source AND/OR Linking
144
8.7 Manual Trigger 145
8.8 Internal Trigger
146
8.8.1 Level Trigger 147
8.8.2 Window-In Trigger
150
8.8.3 Window-Out Trigger
152
8.8.4 Voltage Drop Trigger
154
8.8.5 Waveform Detection Trigger
(Memory Only)
156